Basic Quality Control Equipment

Four (4) portable laboratory containers for radiographic inspection, supplied with all requires equipment for developing, drying of films, etc.
Fourteen (14) Gamma Ray sources (Ir-192) up to 40 Curie and (Se 75) sources up to 80 Curie.
Two (2) Gamma Ray (Ir-192) pipe line crawler.
Two (2) X-Ray sources for vertical & panoramic emission (200KV).
Two (2) X-Ray sources for pipe line internal exposure (crawler) for pipes with diameter 8″-14″ & 14″-24″, 160-200 KV.
Four (4) portable ultrasonic thickness gauges.
Two (2) portable intrinsically safe ultrasonic thickness gauges.
Three (3) portable ultrasonic scanning machines.
Five (5) magnetic inspection devices.
Four (4) portable hardness electronic testers.
Three (3) holiday testers (insulation tester).
Two (2) electronic devices for paint thickness measurement.
Two (2) electronic devices for insulation thickness measurement.
One (1) electronic device for insulation peeling test.
Three (3) mechanical test machines with 20, 40 & 50 tones capacity for tensile and bend test.
Charpy V-notch machine (300 Joules).
Two (2) laboratorial hardness testers with microscope (20×40).
Full range of equipment for the radiographic inspection on field.
One (1) positive material identification equipment (PMI).
Twelve (12) portable stress relieving units total of 950KVA. Each one contains:
Three (3) programmers having the possibility to control automatically 3 presetted programs for up to 12 independent temperature control zones.
One (1) digital temperature recorder for 12 independent points.

For each of the above machines there are extension resistance supply cables 60V.
Silicon insulated 60V cables.
Resistances of various sizes 60V – 2,7KVA.
Three (3) portable spot welding machines Tp2 (for the thermocouples).
Two (2) hardness testers, type: Th130 Equotip Electronic.
Two (2) hardness testers, type: MIC 10.